medium	breathing air acc.	DIN 3188 / EN 12021 : 2014
intake pressure	bar abs.	1 + 0,2
rated overpressure	max bar.	420
delivered quantity measured at number of stages		4
number of cylinders		4
cylinder 1st stage	ø mm	130
cylinder 2nd stage		60
cylinder 3rd stage		32
cylinder 4th stage		14
piston travel	mm	50
intermediate overpressures
1st stage approx.	bar	2,5 - 3,5
2nd stage approx.	bar	15 - 17
3rd stage approx.	bar	70 - 75
4th stage approx.	bar	225 - 400
rotating direction		counter clockwise
cooling		air
lubrication		Ölpumpe
quantity of lubricating oil	l	4,5
oil type		Synthetic Oil
tolerated maximum ambient temperature		+2° bis +45°
tolerated maximum inclination		5°
interval for condensate emptying		every 10-15 minutes

StandardEquipment:

• compressor and motor mounted on frame with shock absorbers. Frame, manufactured in light weight construction, is designed for easy change of power sources.
• micronic type intake filter
• Lubrication by oil pump
• Intercooler after each stage
• aftercooler
• final mechanical separator for the removal of oil-/ water condensate
• optical oil level control on compressor block
• final safety valve 225 bar, 330 bar, 350 bar or 420bar
• back pressure/ non return valve
• thermal circuit breaker
• Automatic star-delta switch
• 3 m connection cable with EEC connector
• hour meter

PURIFICATION SYSTEM F 2400

• COMP TRADE long-life transparent filter cartridge with saturatiuon indicator processing in 3 stages (drying, neutralisation, micro filtering)
• air quality DIN 3188 / EN 12021 : 2014
• filling : MS-AC-MS supplying air quality according to DIN 3188 / EN 12021 : 2014
• Regenerable air volume 1200 m³ by 20° ambient temperature.

FILLING RAMP WITH 4 × 300 OR 4 × 200 BAR DIRECT CONNECTION

• 4 level filling valves with integrated vent G5/8" acc DIN 477
• pressure gauge for filling pressure

AUTO-STOP

• ON/Off switch, main switch and auto stop when reaching final filling pressure
• pressure switch with cut-off when the final pressure is reached

AUTOMATIC DRAINAGE SYSTEM

• drains all separators between the individual stages and also the final separator during compressor Operation
• unloaded start integrated (automatically draining at every shut-down of the unit)
• condensate collecting tank, content approx. 5 litres
• sound absorber
• timer for autodrain system to adjust the most economical drain-intervals

COMPTROL 1

• for oil level control with auto stop and reset button when reaching minimum oil level in the compressor block / oil level indicator. The oil level indicator is situated on front of the compressor-frame for additional easy optical control.

CABINET TEMPERATURE

• Cooling Temperature Control
• Switching off the compressor when the maximum permissible temperature is exceeded

Optional Equipment

ADDITIONAL PRESSURE RANGE consisting of:

• pre adjusted pressure reducing valve
• pressure gauge for additional pressure range
• safety valve for 2nd pressure range

PRESEC SYSTEM

• with automatic control of Cartridge, indication of cartridge saturation and automatic stop, when reaching humidity limits. This is ensured by a sensor inside the filter cartridge.

EXTERNAL CONTROL BOX

• External control box consisting of emergency stop button, operating hours counter, start/stop button, cabinet temperature control lamp, oil level lamp and direction of rotation control

COMPTROL 2

• for temperature control with auto stop and reset button when reaching maximum temperature on the last stage of the compressor block.

EXTERNAL FILLING PANEL

• Filling panel with selectable number of filling connections
• Designed for wall mounting with on/off button, 5 m cable and high pressure hose for connection between compressor and filling panel

TOUCH SCREEN

• Possible languages on the control panel are German, English, Russian, Traditional Chinese, Italian, French, Turkish and Spanish.

FULLY AUTOMATIC START-STOP

• With adjustable hysteresis

OIL TEMPERATURE CONTROL

• With auto stop when the maximum values are reached

OIL PRESSURE CONTROL

• With automatic stop

CONDENSATE TANK

• With 20l